RAM Commercial PROMASTER 2022 Owner's Manual page 238

Table of Contents

Advertisement

236
SERVICING AND MAINTENANCE
FRONT, REAR ROOF LAMPS
See the following steps to replace:
1. Remove two screw and remove the lamp
assembly.
2. Remove the socket bulb by turning counter-
clockwise.
3. Remove bulb and replace as needed.
4. Reinstall the bulb socket and rotate clockwise
to lock in place.
5. Reinstall lamp.
REAR TAIL, STOP, BACKUP, TURN SIGNAL AND
REAR SIDE MARKER LAMPS
See the following steps to replace:
1. Open rear doors.
2. Remove the seven (7) fasteners from the rear
access cover and remove cover to gain access
to the tail lamp assembly fasteners.
Rear Access Cover
3. Remove the two (2) 17 mm tail lamp assembly
fasteners.
4. Disconnect the tail lamp harness connector
and remove tail light assembly from the
vehicle.
5. Remove the tail/stop, turn signal, backup and
rear side marker bulb/socket by rotating
counterclockwise.
6. Remove the bulb and replace as needed.
7. Reinstall bulb/socket and rotate clockwise to
lock in place.
8. Reinstall lamp.

Advertisement

Table of Contents
loading

Table of Contents

Save PDF