Changing Lanesense Status - RAM Commercial PROMASTER 2022 Owner's Manual

106 STARTING AND OPERATING
When the LaneSense system senses a lane drift

situation, the left lane line turns solid yellow.
The LaneSense telltale changes from solid
green to solid yellow. At this time torque is
applied to the steering wheel in the opposite
direction of the lane boundary.
For example: If approaching the left side of the
lane the steering wheel will turn to the right.
Lane Sensed (Solid Yellow Lane Line) With
Solid Yellow Telltale
When the LaneSense system senses the lane

has been approached and is in a lane departure
situation, the left lane line flashes yellow (on/
off). The LaneSense telltale
solid yellow to flashing yellow. At this time
torque is applied to the steering wheel in the
opposite direction of the lane boundary.
For example: If approaching the left side of the
lane the steering wheel will turn to the right.
Lane Approached (Flashing Yellow Lane Line) With
Flashing Yellow Telltale
NOTE:
The LaneSense system operates with similar
behavior for a right lane departure.
C
HANGING
The LaneSense system has settings to adjust the
intensity of the torque warning and the warning
changes from
zone sensitivity (Early/Medium/Late) that you can
configure through the Uconnect system
Ú page 123.
NOTE:
When enabled the system operates above

37 mph (60 km/h) and below 112 mph
(180 km/h).
The warnings are disabled with use of the turn

signal.
The system will not apply torque to the steering

wheel whenever a safety system engages
(Anti-Lock Brakes, Traction Control System,
Electronic Stability Control, Forward Collision
Warning, etc.).
L S S
ANE ENSE TATUS