Body Lubrication - RAM Commercial PROMASTER 2022 Owner's Manual

218 SERVICING AND MAINTENANCE
The cabin air filter is located in the fresh air inlet in
the engine compartment. Perform the following
procedure to replace the filter:
1. Remove the two screws that secure the filter
retainer to the fresh air inlet, and remove the
filter retainer.
Accessing Air Filter
1 — Screw Locations
2 — Fresh Air Inlet
2. Remove and replace the cabin air filter from
the filter retainer.
Removing Air Filter
1 — Fresh Air Inlet
2 — Cabin Air Filter
3 — Cabin Air Filter Retainer
3. Install the cabin air filter/filter retainer back
into the fresh air inlet. When installing the filter
retainer make sure the retainer is fully
engaged.
4. Install the two screws back into the assembly
to secure the filter retainer to the fresh air
inlet.
B L
ODY UBRICATION
Locks and all body pivot points, including such
items as seat tracks, door hinge pivot points and
rollers, liftgate, tailgate, decklid, sliding doors and
hood hinges, should be lubricated periodically with
a lithium-based grease, such as Mopar® Spray
White Lube to ensure quiet, easy operation and to
protect against rust and wear. Prior to the
application of any lubricant, the parts concerned
should be wiped clean to remove dust and grit;
after lubricating, excess oil and grease should be
removed. Particular attention should also be given
to hood latching components to ensure proper
function. When performing other underhood
services, the hood latch release mechanism, and
safety catch should be cleaned and lubricated.
The external lock cylinders should be lubricated
twice a year, preferably in the Autumn and Spring.
Apply a small amount of a high quality lubricant,
such as Mopar® Lock Cylinder Lubricant directly
into the lock cylinder.