Get Started; Additional Information; Mirrors; Inside Rearview Mirror - RAM Commercial PROMASTER 2022 Owner's Manual

30 GETTING TO KNOW YOUR VEHICLE
G S
ET TARTED
The VR button is used to activate/deactivate
your Voice Recognition system. You can also use
the system's "Wake Up" word to activate voice
recognition. The "Wake Up" word can be set
through the Uconnect Settings Ú page 123.
Helpful hints for using Voice Recognition:
Reduce background noise. Wind noise and

passenger conversations are examples of noise
that may impact recognition.
Speak clearly at a normal pace and volume

while facing straight ahead.
Each time you give a Voice Command, first push

the VR button, wait until after the beep, then say
your Voice Command. Also, you can say the
vehicle "Wake Up" word to issue a Voice
Command. The available "Wake Up" words are
"Hey Uconnect" and "Hey Ram".
You can interrupt the help message or system

prompts by pushing the VR button and saying a
Voice Command from the current category.
Uconnect Voice Command Buttons
1 — Push To Answer a Phone Call
2 — For Vehicles Equipped With Navigation:
Push The Voice Recognition Button To Begin
Radio, Media, Navigation, Climate, Start Or An-
swer A Phone Call, And Send Or Receive A Text
2 — For Vehicles Not Equipped With Navigation:
Push The Phone Button To Answer An Incoming
Phone Call
3 — Push To End A Phone Call
A I
DDITIONAL NFORMATION
© 2022 FCA US LLC. All rights reserved. Mopar and
Uconnect are registered trademarks and Mopar
Owner Connect is a trademark of FCA US LLC.
SiriusXM® and all related marks and logos are
trademarks of SiriusXM® Radio Inc. Ú page 270.
For Uconnect system support, call
1-877-855-8400 (24 hours a day 7 days a week)
DriveUconnect.com
or visit (US) or
DriveUconnect.ca (Canada).

MIRRORS

I R M
NSIDE EARVIEW IRROR
Manual Mirror — If Equipped
The rearview mirror can be adjusted up, down, left,
and right. The mirror should be adjusted to center
on the view through the rear window.
Headlight glare can be reduced by moving the
small control under the mirror to the night position
(toward the rear of the vehicle). The mirror should
be adjusted while set in the day position (toward
the windshield).
Adjusting Rearview Mirror