RAM Commercial PROMASTER 2022 Owner's Manual page 111

Top View
The Top View will show in the Uconnect system with
Rear View or Front View in a split screen display.
There are integrated ParkSense arcs in the image
at the front and rear of the vehicle. The arcs will
change color from yellow to red corresponding the
distance zones to the oncoming object.
Surround View Camera View
NOTE:
Front tires will be in image when the tires are

turned.
Due to wide angle cameras in the mirrors, the

image will appear distorted.
Top View will show which sliding doors are open.

Open front doors will remove outside image.

Rear View
This is the default view of the system in
REVERSE and is always paired with the
Top View of the vehicle with optional
active guidelines for the projected path
when enabled.
Rear Cross Path View
Pressing the Rear Cross Path button will
give the driver a wider angle view of the
Rear View. The Top View will be disabled
when this is selected.
Front View
The Front View will show you what is
immediately in front of the vehicle and is
always paired with the Top View of the
vehicle.
Front Cross Path View
Pressing the Front Cross Path button will
give the driver a wider angle view of the
Front View. The Top View will be disabled
when this is selected.
Back Up Camera View
Pressing the Back Up Camera button will
provide a full screen rear view.
STARTING AND OPERATING
NOTE:
If the Back Up Camera was selected through the
Surround View Camera menu, exiting out of screen
display will return to the Surround View menu.
If the Back Up Camera was manually activated
through the Controls menu of the Uconnect
system, exiting out of the display screen will
return to the Controls menu.
Deactivation
The system can be deactivated under the following
conditions:
The speed of the vehicle is greater than

8 mph (13 km/h).
The vehicle shifted into PARK.

The vehicle is in any gear other than REVERSE

and the X button is pressed.
The camera delay system is turned off manually

through the Uconnect Settings Ú page 123.
NOTE:
If snow, ice, mud, or any foreign substance

builds up on the camera lenses, clean the
lenses, rinse with water, and dry with a soft
cloth. Do not cover the lenses.
If a malfunction with the system has occurred,

see an authorized dealer.
109
4