Table of Contents
Advertisement
ART /G2+ MONITOR
4
CHARACTERISTICS
-
Hands-free monitor.
- 4,3" TFT colour screen
- P
ush button
s for access and selection of menu function.
- Monitor
with simple installation non-polarised 2 wires
- User menu.
- Installer menu.
-
Image and communication settings menu
- Output to auxiliary call repeater (maximum 50mA/12Vdc).
- "HZ" input for calls from apartment front door.
at the same time (with system and monitors in standby).
- Push buttons for Door release 1 and 2.
- Notification leds.
- Configuration switches.
SYSTEM OPERATION
-
To make a call, the visitor must press the button of the apartment; an audible sound indicates that the call is being made
and
the door panel
LED
a call is being made. At this moment, the apartment's monitors receive the call. If another apartment is called by mistake,
press the button for the correct apartment and the first call will be cancelled.
- Upon receiving the call, the image will appear on the screen of the master monitor (and slave 1, if it exists) without the
visitor knowing and icon
press
one of the buttons (located above the raised dots for the visually impaired) of the monitor to display
the call is not answered within 45 seconds,
-
To establish communication, press
will turn off and the led
-
Connection will last for 90 seconds or until
pressed
. When communication ends,
synthesis is enabled, a 'Communication is finished' message will indicate that the call is over.
-
To open door
or
1
during the call or communication processes: one press will activate the lock release for
panel LED
will also turn on for seconds. If vocal synthesis is enabled, a 'Door
on the door panel.
-
Detailed operation of the monitor is described on pp.
(
.
Important:
will turn on. If vocal synthesis is enabled, a 'Call is in progress' message appears indicating that
displayed on the screen will
the door panel
the push button below
will
turn on
.
the push button below
door panel
of the door panel press the
,
2
3
bus).
Up to 6 monitors/ apartments with push button "HZ" activated
in
green
color
. To view the image from slave monitors 2 or 3,
LED
will turn off and the system will become free.
off-the-hook icon
on-the-hook icon
LED
will turn off and the system will become free. If vocal
push button below of
corresponding icon
6 to 27
.
shown
on the screen. Door panel LED
shown on the
displayed on the screen
3
seconds and
is
open' message will be indicated
3
the image. If
screen
is
the door
Advertisement
Table of Contents
