ART 4WH/G2+ MONITOR
CHARACTERISTICS
-
Hands-free monitor.
- 4,3" TFT colour screen.
- Monitor
with simple installation non-polarised 2 wires
- Wi-Fi
transmission monitor to call transfer to mobile
transmission. (
No additional power supply required in the apartment
- The monitor ART 4WH/G2+, interacts with hearing aids equipped with T-mode, making conversation between
apartment and door panel easier.
- P
ush button
s for access and selection of menu function.
- User menu.
- Wi-Fi menu.
- Installer menu.
-
Image and communication settings menu
- Output to auxiliary call repeater (maximum 50mA/12Vdc).
- "HZ" input for calls from apartment front door.
at the same time (with system and monitors in standby).
- Push buttons for Door release 1 and 2.
- Notification leds.
- Configuration switches.
- ART 4WH/G2+ monitor with
SYSTEM OPERATION
To make a call, the visitor must press the button of the apartment; an audible sound indicates that the call is being
made and
door panel
indicating that a call is being made. At this moment, the apartment's monitors receive the call. If another apartment is
called by mistake, press the button for the correct apartment and the first call will be cancelled.
- Upon receiving the call, the image will appear on the screen of the master monitor (and slave 1, if it exists) without the
visitor knowing and icon
one of the buttons of the monitor to display the image
will turn off and the system will become free.
- If call transfer to your mobile phone has been programmed, you can cancel the transfer at any time from the monitor,
with it being necessary to communicate with the door panel from the main menu.
- To establish communication, press
screen in red color, door panel LED
that the hearing aid is between 15 and 25 cm away from the monitor to ensure maximum audio quality during
communication with the door panel.
- Co
mmunication
will last for 90 seconds or until
When communication ends,
enabled, a 'Communication is finished' message will indicate that the call is over.
-
To open door
or
1
during the call or communication processes: one press will activate the lock release for
LED
will also turn on for seconds. If vocal synthesis is enabled, a 'Door
door panel.
-
Detailed operation of the monitor is described on pp.
(
.
Important:
V.01
& later (accepts general door panels 'special codes').
LED
will turn on. If vocal synthesis is enabled, a 'Call is in progress' message appears
displayed on the screen
the button below
will turn off and the led
the button below
door panel
LED
of the door panel
, press the
2
3
bus).
smartphone.
Only the master monitor can activate Wi-Fi
).
Up to 6 monitors/ apartments with push button "HZ" activated
in
green
color
. To view the image from slave monitors 2 or 3, press
. If the call is not answered within 45 seconds,
icon
sh wn on
o
the screen. The icon
will turn on.
on-the-hook icon
will turn off and the system will become free. If vocal synthesis is
button below the
corresponding icon
6 to 29
.
door panel
If you have a hearing aid, make sure
shown on the screen is
displayed
3
seconds and
is
open' message will be indicated on the
3
LED
displayed on the
pressed.
on the screen
door panel
Need help?
Do you have a question about the G2+ 4WH and is the answer not in the manual?