Table of Contents
Advertisement
ART /G2+ MONITOR
4
MAIN MENU
If the device is in standby (screen switched off), to access the main menu, press any of the buttons of the monitor. Then press
the button located just below the corresponding icon. The device will return to standby mode after 0 seconds without activity.
Press the button below icon
Disabled Enabled
Press the button below icon
apartment or other apartments (see p
building, the icon
If there is a monitor configured as "guard" in the building, the icon
monitors (instead of icon
page 27).
Press the button below icon
card is inserted in the monitor, images/videos will be recorded on the MicroSD card (see p
There are no images/videos pending viewing.
There are images/videos pending viewing.
Indicates that the inserted MicroSD card must be formatted from the monitor. Access this function by
!
Press the button below icon
panel camera to be changed, the audio on the corresponding door panel to be activated and the door to be
opened (see p. 2).
monitor, a new menu screen will be displayed; press the button below the icon
the master door panel.
to make changes to the system settings (see pp. 7 to 11).
Press the button below icon
disturb' function: If the monitor is in 'Do not disturb' mode, the status LED will illuminate (red) and
the ringtone on the monitor will not sound when a call
With the "Do not disturb" mode deactivated, a one-second press accesses the menu, allowing you
to set a "Do not disturb" mode time period (see pages 17 to 18), activate/deactivate the intercom
between apartments (see page 18) and set an "Automatic door opening" mode time (see pages
19 to 20).
to intercom menu will be placed in "Access settings menu screen". See page 7.
). Press the button below the icon
to display the list of images recorded in the memory of the device. If a MicroSD
pressing the button below icon
below icon
to start formatting the MicroSD card. To exit without formatting, press the button below icon
.
to display the image from the
1
If the "display IP cameras" menu (programmable by the installer) is activated on the
Main menu
28-04-2022
09:27
PM
for 3 seconds
to enable
to access the menu of the intercom between other monitors in the same
age 20 to 23
).
Note:
to access the MicroSD card formatting menu, then press the button
2
and for 1 second to
(
see note
"HZ" p g 5)
a e
If there is a guard monitor configured in the
will appear on the apartment's main menu
to make a call to the guard monitor, (see
master
door panel. Note: This enables the door
to display the image from
6
disable the 'Do not
is received.
ages 4 to 6
2
2 ).
Advertisement
Table of Contents
