R&S NRP-Z27 Operating Manual page 5

R&S NRP-Z27/-Z37 Supplement
Operation of the Power Sensor Module R&S NRP-Z27/-Z37
on the R&S NRP base unit
The power sensor module supplied with this manual has firmware version 01.61 or later. To operate it
on the R&S NRP base unit, all software components installed on the base unit must have version num-
ber 02.00 or later. If you want to use the distortion compensation (command group: SENSe:RGAMma,
see page 6-12), the 'Main Program' must have at least version number 3.24.
The version numbers of the software components can be read out under the menu item 'System Info', in
the lines 'Main Program', 'Bootloader' and 'Keybd. Ctrl'. For firmware versions earlier than 02.00, the
menu item 'System Info' can be found in the File menu; otherwise, in the System menu.
1169.3870.12
Supplement 1 E-1