R&S NRP-Z27 Operating Manual page 37

R&S NRP-Z27/-Z37
Loop ...
1169.3870.12
Opens the Loop controls dialog
window where the cyclic transfer of
commands and command sequences
can be controlled.
In the Delay / ms field, the time
interval for the cyclic transfer is
specified in milliseconds.
The number of completed transfer
cycles is displayed in the Counter
field. If Open on startup is active, the
Response time dialog is
automatically opened when the
Terminal module is started. The dialog
window is closed with OK.
3.5
Program module "Terminal"
E-1