R&S NRP-Z27 Operating Manual page 36

Program module "Terminal"
Response
Time ...
1169.3870.12
Filter criteria:
Only + Starting with: Only lines starting with the entered character
string are displayed.
Not + Starting with: Only lines not starting with the entered character
string are displayed.
Only + Containing: Only lines containing the entered character string
are displayed.
Not + Containing: Only lines not containing the entered character
string are displayed.
Lines not matching the specific filter criterion are blanked but not
cleared.
Filtering is started with Apply. The number of lines matching the filter
criterion is displayed in the Linecounter field. If Open on startup is
active, the Output Postfilter dialog is automatically opened when the
terminal is started. The dialog window is closed with OK.
.
Opens the Response time dialog window where the response time of
the power sensor module can be set.
Current indicates the time elapsed between dispatch of the last
command and receipt of an acknowledgement from the power sensor
module.
When the Max button is clicked, the response times exceeding the
value in the limit / ms field are recorded. When the Min button is
clicked, the response times within the value in the limit / ms field are
recorded.
If Trigger on first incoming response is active, the time
measurement is terminated as soon as the first response arrives after a
command is sent. If Trigger on response matching filter settings is
active, the time measurement is terminated as soon as the first
response matching the filter criterion in the Output Postfilter dialog
window is received.
If Open on startup is active, the Response Time dialog is
automatically displayed when the Terminal module is started. The
dialog window is closed with OK.
3.4
R&S NRP-Z27/-Z37
E-1