System:minpower; System:transaction:begin; System:transaction:end - R&S NRP-Z27 Operating Manual

R&S NRP-Z27/-Z37 Remote Control - Commands

SYSTem:MINPower?

SYSTem:MINPower? yields the lower test limit of the power sensor module. This query can be used to
determine a useful resolution for the result display near the lower test limit.

SYSTem:TRANsaction:BEGin

SYSTEM:TRANsaction:BEGin marks the beginning of a sequence of setting commands between which
the parameter limits must not be checked. This prevents the display of error messages when a setting
command causes a conflict that is resolved by a subsequent setting command. See

SYSTEM:TRANsaction:END.

SYSTem:TRANsaction:END
SYSTEM:TRANsaction:END marks the end of a sequence of setting commands between which the
parameter limits must not be checked. After this command, the parameter limits are checked.
1169.3870.12 6.15 E-2