R&S NRP-Z27 Operating Manual page 34

Program module "Terminal"
Fig. 3-1 Sending commands using the Input field
Fig. 3-2 Sending commands using command files
Table 3-1 Buttons assigned to the Input field
Button Function
Send Sends the content of the Input entry field to the power sensor module.
Loop With Loop the command or command sequence is cyclically sent. Pressing
the button again terminates the cyclic transmission. The repetition rate is set
in a dialog window that can be opened with View - Loop...
Clear Clears the content of the Input field.
Font key Opens a dialog window where the font for the Input field can be selected.
Colour key Opens a dialog window where the background colour of the Input field can
be selected.
1169.3870.12 3.2
R&S NRP-Z27/-Z37
Key combination
Alt + S
Alt + L
Alt + R
E-1