Unpacking The At-Brkt-J24 Wall Mount Kit - Allied Telesis XS910/8 Manual

XS910/8 Unmanaged Switch Installation and User's Guide

Unpacking the AT-BRKT-J24 Wall Mount Kit

42
To unpack the AT-BRKT-J24 wall mount kit, perform the following
procedure:
1. Remove all components from the shipping package.
Note
Store the packaging material in a safe location. You must use the
original shipping material if you need to return the unit to Allied
Telesis.
2. Verify that One pair of brackets is included in your wall mount package
listed in Table 6.
Table 6. Components in the AT-BRKT-J24 Wall Mount Kit
Four
brackets
16 M4x6mm
screws
3. If any item is missing or damaged, contact your Allied Telesis sales
representative for assistance.
Components