Safety Symbols; Safety Warnings - Veeder-Root TLS2P Setup And Operation Manual

Hide thumbs Also See for TLS2P:
Table of Contents

Advertisement

Introduction

Safety Symbols

The following safety symbols are used in this manual to alert you to important safety hazards and precautions.

Safety Warnings

EXPLOSIVE
Fuels and their vapors are extremely
explosive if ignited.
ELECTRICITY
High voltage exists in, and is supplied
to, the device. A potential shock haz-
ard exists.
WARNING
Heed the adjacent instructions to avoid
damage to equipment, property, envi-
ronment or personal injury.
This system operates near highly combustible fuel storage tanks.
FAILURE TO COMPLY WITH THE FOLLOWING WARNINGS AND SAFETY
PRECAUTIONS COULD CAUSE DAMAGE TO PROPERTY, ENVIRONMENT,
RESULTING IN SERIOUS INJURY OR DEATH.
Leaking tanks can create serious environmental and health hazards. Improper
programming and operation may also result in equipment self-test failures
and submersible pump shutdowns.
To ensure proper installation, operation, and continued safe use of this
product:
1. Read and follow all instructions in this manual, including all safety
warnings.
2. Have equipment installed by a contractor trained in its proper installation
and in compliance with all applicable codes including: the National
Electrical Code; federal, state, and local codes; and other applicable
safety codes.
3. Ensure that this equipment is properly programmed.
4. Operate this equipment in accordance with the instructions in this
manual.
5. Promptly investigate any alarm conditions.
6. Substitution of components may impair intrinsic safety.
FLAMMABLE
Fuels and their vapors are extremely
flammable.
READ ALL RELATED MANUALS
Knowledge of all related procedures
before you begin work is important.
Read and understand all manuals
thoroughly. If you do not understand
a procedure, ask someone who does.
WARNING
2

Advertisement

Table of Contents
loading

Table of Contents