Veeder-Root TLS-450 Manual
  1. Manuals
  2. Brands
  3. Veeder-Root Manuals
  4. Music Mixer
  5. TLS-450
  6. Manual

Veeder-Root TLS-450 Manual

Board and software replacement/upgrade
Hide thumbs Also See for TLS-450:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Setup and Operation
Manual No: 577013-954
●
Revision: H
TLS-450 Console
Board and Software Replacement/Upgrade

Advertisement

Table of Contents
loading

Related Manuals for Veeder-Root TLS-450

Summary of Contents for Veeder-Root TLS-450

  • Page 1 Manual No: 577013-954 ● Revision: H TLS-450 Console Board and Software Replacement/Upgrade...
  • Page 2 Customer Service will work with production facility to have the replacement product shipped as soon as possible. If “lost” equipment is delivered at a later date and is not needed, Veeder-Root will allow a Return to Stock without a restocking fee.

  • Page 3: Table Of Contents

    Table of Contents Introduction Contractor Certification Requirements ................1 Related Manuals .......................1 Before You Begin ......................2 Safety Precautions ......................2 Precautions Against Static Electricity ................3 System Backup .........................3 Replacing the CPU Board Removing the CPU Board ....................8 Replacing Software CF Card Replacing CF Card from Version 3.X or Earlier to Latest Version ........14 Replacing the iButton ....................15 Installing Software Features...

  • Page 4: Contractor Certification Requirements

    This manual does not provide troubleshooting information. Contractor Certification Requirements Veeder-Root requires the following minimum training certifications for contractors who will install and setup the equipment discussed in this manual: Installer (Level 1) Certification: Contractors holding valid Installer Certification are approved to perform wiring and conduit routing;...

  • Page 5: Before You Begin

    1. Read and follow all instructions in this manual, including all safety warnings. 2. Remove rings from hands, metal watch bands and bracelets, and loose hanging neck jewelry before performing these procedures. 3. Do not modify or use service parts other than those provided by Veeder-Root.

  • Page 6: Precautions Against Static Electricity

    Introduction Precautions Against Static Electricity Precautions Against Static Electricity Before removing electronic components from their antistatic bags read the following static electricity precautions. Before handling any components, discharge your body's static electric charge by touching a grounded surface. Do not remove parts from their antistatic bags until you are ready to install them. Do not lay parts on the antistatic bags! Only the insides are antistatic.

  • Page 7: Figure 1. Locating Printer's Usb Connector

    Introduction System Backup sw feat act2.eps Figure 1. Locating Printer’s USB connector LEGEND FOR NUMBERED BOXES IN Figure 14 1. Comm module 3. Printer USB connector 2. Top of CPU board...

  • Page 8: Figure 2. Usb/Ethernet Board - V-R Thumb Drive Ports

    Introduction System Backup 954-10.eps Figure 2. USB/Ethernet board - V-R thumb drive ports LEGEND FOR NUMBERED BOXES IN Figure 2 1. USB/Ethernet board bracket 2. V-R thumb drive plugged into USB port Touch the Diagnostics button on the Home Screen (see item 2 in Figure 3).

  • Page 9: Figure 3. Accessing Diagnostic Main Screen From The Home Screen

    Introduction System Backup 09-21-2007 11-31-30 ALL TANKS SYSTEM STATUS ALL TANKS ALL SENSORS USER DEFINED 1 USER DEFINED 2 USER DEFINED 3 Inventory Delivery Environment 954-14.eps Figure 3. Accessing Diagnostic Main Screen from the Home Screen LEGEND FOR NUMBERED BOX IN Figure 3 1.

  • Page 10: Figure 5. Initiating A System Backup

    Introduction System Backup Touch the Backup button (item 1 in Figure 5) to begin the system backup process. 09-21-2007 11-31-30 Software Maintenance - Backup Restore Backup Download Install Restore IDLE Prepare USB Revert to Previous Backup Restore Recovery Software Versions Drive 954-18.eps Figure 5.

  • Page 11: Replacing The Cpu Board

    Replacing the CPU Board Removing the CPU Board Switch Off power to the console. Open both front doors of the console (see Figure 6). 954-1.eps Figure 6. Front doors LEGEND FOR NUMBERED BOXES IN Figure 6 1. Left (Printer) door 3.

  • Page 12: Figure 7. Locating Cpu Board Hold-Down Pins

    Replacing the CPU Board Removing the CPU Board Locate the three retention snap pins along the front of the CPU board (see Figure 7). WARNING: TO MAINTAIN WARNING: TO MAINTAIN WARNING: TO MAINTAIN WARNING: TO MAI INTRINSIC SAFETY, ALL INTRINSIC SAFETY, ALL INTRINSIC SAFETY, ALL INTRINSIC SAFETY COVERS MUST BE IN...

  • Page 13: Figure 8. Cable Connections To Cpu Board

    Replacing the CPU Board Removing the CPU Board 954-9.eps Figure 8. Cable connections to CPU board LEGEND FOR NUMBERED BOXES IN Figure 8 1. USB printer cable 3. Display data cable 2. Touch screen control cable 4. LED/display cable Tilt the board a little away from the bulkhead (item 2 in Figure 7) and grasping the edge of the board pull out firmly to remove the board from its backplane board connector.

  • Page 14: Figure 9. Locating Cpu Board Components

    C273 C239 C239 R233 R233 C283 C283 C294 C294 C296 C296 BD Group - CPU board - TLS-450 console BD Group - CPU board - TLS-450 console C284 C284 332878-001 Rev A 332878-001 Rev A C293 C293 C252 C252 C281...

  • Page 15: Figure 10. Installing Ibutton Flanged End Up

    Replacing the CPU Board Removing the CPU Board 954-4.eps Figure 10. Installing iButton flanged end up 954-5.eps Figure 11. Orient CF card side grooves to the CF card connector guides LEGEND FOR NUMBERED BOXES IN Figure 11 1. CF card connector (female) 4.

  • Page 16: Figure 12. Removing/Replacing Ram Board

    Replacing the CPU Board Removing the CPU Board FUD2 FUD2 J8 J8 Main Memory Main Memory 30 30 31 31 R207 R207 R171 R171 R173 R173 R174 R174 R176 R176 R347 R347 59 59 61 61 Expansion Memory Expansion Memory FUD2 FUD2 FUD2...

  • Page 17: Replacing Software Cf Card

    Replacing Software CF Card Switch Off power to the console. Open the left (Printer) door of the console (see Figure 6). Remove the grounding wrist strap (Part No. 576010-908) from its package and wrap one end around your wrist. Adhere the other end to the metal plate on the inside of the Printer door. Remove the CF card from the CPU board (see item 1 in Figure 9 for location) and install the new CF card.

  • Page 18: Replacing The Ibutton

    Replacing the iButton Switch Off power to the console. Open both front doors of the console (see Figure 6). Locate the three retention snap pins along the front of the CPU board (see Figure 7). Remove the grounding wrist strap (Part No. 576010-908) from its package and wrap one end around your wrist.

  • Page 19: Installing Software Features

    Installing Software Features Before installing a software feature upgrade, perform a system backup using a V-R Backup thumb drive (P/N 330020-607) following the procedure described in “System Backup” on page 3. The V-R Backup thumb drive is different from a V-R Software Upgrade thumb drive - the two are not interchangeable.

  • Page 20: Feature Upgrade Procedure

    Installing Software Features Feature Upgrade Procedure Turn on power to the console and follow the required Feature Upgrade procedure. When you have completed the Feature Upgrade procedure reverse the steps 3 through 6 above to remove the thumb drive and reattach the printer cable to its CPU board USB connector.

  • Page 21: Figure 15. Downloading Software Features From The Usb Adapter

    Installing Software Features Feature Upgrade Procedure When the Software Maintenance - Backup Restore screen displays touch the Download tab. Touch the check boxes beside the feature(s) you wish to download to the console from the i-button (item 1 in Figure 15). Once you have selected the desired features to download, touch the Download button to begin the download process (item 2 in Figure 15).

  • Page 22: Verify Features Installed

    Installing Software Features Verify Features Installed 09-21-2007 11-31-30 Software Maintenance - Install Install Backup Download Install Restore Waiting Selection Feature Status Business Inventory Reconciliation Ready to install Ready to install AccuChart II 954-16.eps Figure 16. Installing Software Features LEGEND FOR NUMBERED BOXES IN Figure 16 1.

  • Page 23: Figure 18. Verifying Installed Software Features

    Total Control * Email Notification * Custom On-Board Help * Custom Alarms * Custom Dashboard TLS-450 Direct Access TM Software/Web Browser Business Inventory Reconciliation AccuChart II 954-18.eps Figure 18. Verifying Installed Software Features LEGEND FOR NUMBERED BOXES IN Figure 18 1.

  • Page 24: Software Maintenance

    Software Maintenance Before installing a software upgrade, perform a system backup using a V-R software thumb drive P/N 330020- 604 following the procedure described under System Backup in “Before You Begin” on page 2. The V-R Backup thumb drive is different from a V-R Software Upgrade thumb drive - the two are not interchangeable.

  • Page 25: Software Download Procedure

    Software Maintenance Software Download Procedure sw feat act2.eps Figure 19. Locating Printer’s USB connector LEGEND FOR NUMBERED BOXES IN Figure 14 1. Comm module 3. Printer USB connector 2. Top of CPU board Software Download Procedure The Download tab screen is used to control USB downloads from either a valid V-R Code/Features USB thumb drive or a V-R Recovery USB thumb drive that is plugged into a USB port in the console.

  • Page 26: Software Install Procedure

    Software Maintenance Software Install Procedure Touch the box beside one or more of the desired selection(s) in the Feature column that you want to download. Touch the Download button and the screen's status bar will read 'Downloading'. If pending updates are already on the CF card and were never activated, you will be asked if you want to delete the pending updates, or to abort the operation.
  • Page 27 For technical support, sales or other assistance, please visit: www.veeder.com...

Table of Contents