Spectra TFinity Site Preparation Manual page 25

Chapter 2 — Site Requirements
Power Cord Specifications The power cords included with the library are
considered part of the library and are not intended for use with any other
equipment. The power cord must meet the specifications for the country
where the library will be installed.
North America and Korea 200–240 VAC Power Cord The criteria for a
200‐volt to 240‐volt AC power cord in North America and Korea are as
follows:
International 200–240 VAC Power Cord The criteria for an international
200‐volt to 240‐volt AC power cord are as follows:
March 2015
Parameter
Power cordage
Power input connectors
Parameter
Power cordage
Power input connectors
Specification
SJT type, three‐conductor, 14 AWG minimum
 Male: Connector must be of the proper type,
rating, and safety approval (see Supply‐End
Connector Types on page
 Female: IEC 60320 C13
Specification
Flexible, HAR (harmonized) type H05VV‐F, three
conductor, cord with minimum conductor size of
1.7 square millimeters (0.0026350 square inches).
 Male: Connector must be of the proper type,
rating, and safety approval for the intended
country (see Supply‐End Connector Types on
page 26).
 Female: IEC 60320 C13
Site Preparation Guide—Spectra TFinity Library
Physical Requirements
26).
25