Advertisement
22
www.raider.bg
To remove the safety eye shield , loosen the adjustable knob and then take it down.
To adjust the safety eye shield position, loosen the right or left adjustable knob a little by
twisting it clockwise or anticlockwise, then along the groove to twist the right or left safety eye
shield to the desired work position and then retighten the adjustable knob by twisting it firmly.
1. Right Adjustable Knob ; 2. Right Safety Eye Shield;
3. Screw; 4. Tighten; 5. Loosen; 6. Groove; 7. Left Adjustable Knob; 8. Left Safety Eye
Shield; 9. Tighten; 10. Loosen
7. INSTALLING OR REPLACING THE FINE GRIT WHEEL
CAUTION: Make sure that the direction of the outer flange is correctly. That is, make sure
he protruding part of the outer flange always upwards. Mounting the outer flange on the wrong
side may result in the dangerous vibration.
To uninstall or replacing the fine grit wheel on the left side of the tool, perform the
following steps:
1. Pull out to remove the left wheel shaft cover directly.
2. Using a screwdriver to loosen and remove the three tapping screws by twisting them
anticlockwise and then take down the left side cover from the tool.
3. Press down the wheel shaft lock button while using the hex wrench to loosen and remove
the hex nut by twisting it clockwise.
Advertisement
