Advertisement
4. Take down the nut, outer flange, fine grit wheel, plastic bearing in order. Replace the fine
grit wheel with a new one if necessary.
1. Left spindle shaft cover; 2. Tapping screw;
3.Screwdriver; 4. Left side cover ;
5. Spindle shaft lock button; 6. Hex wrench;
7. Hex nut; 8. Outer flange; 9. Fine grit wheel ;10. plastic bearing
To install the fine grit wheel onto the tool, perform the uninstall procedure in reverse.
WARNING: BE SURE TO TIGHTEN THE HEX NUT SECURELY. Also be careful not to tighten
the nut forcibly. Slipping your hand from the hex wrench can cause a personal injury.
INSTALLING OR REPLACING THE COARSE GRIT WHEEL
To install or replacing the coarse grit wheel on the right side of the tool, follow the procedure of
"installing or replacing the fine grit wheel"
1. Coarse grit wheel 2. Right spindle shaft cover
NOTICE: while using the hex wrench to loosen and remove the hex nut on the right side,
twist it anticlockwise.
8. USING THE TOOL AS A MINI DIE GRINDER
To use the tool as a mini die grinder, perform the following steps:
1. Pull out to remove the right wheel shaft cover directly.
23
Advertisement
