Advertisement
1. Speed adjusting dial
5. ASSEMBLY
CAUTION: After install or adjusting the work rest position, make sure that the adjustable
knob is firmly secured.
CAUTION: Before tightening the bolts, adjust the gap between the Grinding wheel and
work rest to a maximum of 1.6 mm
To install the left or right work rest onto the tool, align the grove on the tool body with the
groove on the work rest, insert the hex bolt through the two groove and hold on, then secure
it with the adjustable knob
To remove the work rest, loosen the adjustable knob and then take it down.
To adjust the work rest position, loosen the right or left adjustable knob a little by twisting it
clockwise or anticlockwise , then twist the right or left work rest to the desired work position
and then retighten the adjustable knob by twisting it firmly.
1. Right Adjustable Knob; 2. Right Work Rest
3. Hex bolt; 4. Groove; 5. Tighten; 6. Loosen;
7. Left Adjustable Knob ; 8. Left Work Rest; 9. Tighten; 10. Loosen;
6. THE SAFETY EYE SHIELD
CAUTION: After installing or adjusting the safety eye shield position, make sure that the
adjustable knob is firmly secured.
To install the safety eye shield onto the tool, insert the safety eye shield onto the screw
directly , then secure it with the adjustable knob .
21
Advertisement
