Subaru EyeSight 2016 Manual page 45

Adaptive Cruise Control
■ Decreasing the set vehicle target speed
●
Using the RES/SET switch
While driving with Adaptive Cruise Control on,
operate the RES/SET switch as follows.
• Push to the "SET/-" side briefly.
Every time the switch is pushed, the set
vehicle target speed will decrease to the
next 5 km/h decrement.
• Push to the "SET/-" side continuously.
While the switch is being pushed, the set
vehicle target speed will decrease in
decrement of 1 km/h. When operating the
switch, the set vehicle target speed
changes on the combination meter display.
●
Using the brake pedal
(1) Depress the brake pedal to decrease the vehicle speed. (Adaptive Cruise Control will be
cancelled and
(2) When the desired speed is reached, press the RES/SET switch to the "SET/-". The
speed at the time of pressing the switch will be set as the new vehicle speed, and it
appears in the EyeSight display area.
■ Accelerating temporarily
Depress the accelerator pedal to accelerate temporarily.
When the accelerator pedal is released, the vehicle returns to the set vehicle speed.
When the driver accelerates the vehicle by depressing the acceleration pedal while the
Adaptive Cruise Control is operating,
completed, returns to green.
44
changes from green to white.)
turns white. When the acceleration is
S02458