Subaru EyeSight 2016 Manual page 41

Adaptive Cruise Control
The Adaptive Cruise Control can be set when the vehicle is stopped with the
driver depressing the brake pedal. The vehicle will start to be held in a
stationary position when the
Adaptive Cruise Control.
(2) Setting Adaptive Cruise Control
Press the RES/SET switch to "SET/-" or
"RES/+".
Adaptive Cruise Control is now set, and cruise
control will start.
If no vehicle in front has been detected, the
vehicle drives at the constant set target
speed.
When Adaptive Cruise Control is set, the set
speed is displayed and
white to green.
• The target vehicle speed can be set between 30 km/h and 145 km/h.
• If the vehicle speed is approximately 30 km/h or less when the vehicle
speed is set, the set vehicle speed is set to 30 km/h.
• When driving on a curve, the vehicle may not accelerate, or may
decelerate, even if the set speed is higher than the current vehicle speed.
• If
does not illuminate, even when the
pressed, Adaptive Cruise Control will not operate.
• If
does not illuminate and this occurs many times, even when the
(CRUISE) switch is pressed, there may be a malfunction in the
system. Contact a SUBARU dealer and have the system inspected.
40
NOTE
changes from
NOTE
(CRUISE) switch is pressed to set the
(Green)
(CRUISE) switch is
S02441
S02442