Table of Contents
Advertisement
Conventional Cruise Control
■ Resuming a vehicle speed that was previously stored
A vehicle speed previously set is stored in memory
press the RES/SET switch to the "RES/+". (The EyeSight display area shows the set condi-
tion again.)
Resuming is possible when a vehicle speed was previously set, and the current vehicle
speed is approximately 30 km/h or more.
* The vehicle speed stored in memory is erased at the following times:
- The cruise control is turned off by pressing the
- Either vehicle Dynamics Control or Traction Control Function has been
activated.
- The cruise control mode was switched from Conventional Cruise Control
to Adaptive Cruise Control.
• The vehicle will drive at a constant speed that was set between approxi-
mately 30 km/h and 145 km/h.
• If there is no vehicle speed in the memory (a previously set vehicle speed),
the vehicle speed cannot be resumed by depressing the RES/+ switch.
78
S02444
NOTE
*
. To recall and set that vehicle speed,
(Green)
(CRUISE) switch.
S02452
Hide quick links:
Advertisement
Table of Contents
