Subaru EyeSight 2016 Manual page 19

About EyeSight
■
(CRUISE) switch
• Switches cruise control
• When this switch is pressed "
combination meter display. This indicates that the main cruise control is turned on.
⇒
Refer to pages 39 and 70.
• Can be used to cancel the cruise control.
⇒
Refer to pages 50 and 75.
* Adaptive Cruise Control and Conventional Cruise Control
■ RES/SET switch
●
SET/-
• Can be used to set cruise control
• Can be used to reduce the set vehicle speed (when cruise control
⇒
Refer to pages 40 and 44 (for Adaptive Cruise Control).
⇒
Refer to pages 72 and 74 (for Conventional Cruise Control).
* Adaptive Cruise Control and Conventional Cruise Control
●
RES/+
• Can be used to set cruise control
• After cruise control
function at the vehicle speed that was previously set.
• Can be used to increase set vehicle speed (when cruise control
⇒
Refer to pages 43 and 53 (for Adaptive Cruise Control).
⇒
Refer to pages 73 and 78 (for Conventional Cruise Control).
* Adaptive Cruise Control and Conventional Cruise Control
●
CANCEL switch
Cancels cruise control*.
* Adaptive Cruise Control and Conventional
Cruise Control
⇒
Refer to pages 50 and 75.
■
(Following distance setting) switch
/
• Can be used to switch the set following distance in 4 stages: (only when Adaptive Cruise
Control is on).
⇒
Refer to page 46.
• When the
Conventional Cruise Control is possible by pressing the
setting) switch*.
* To switch to Conventional Cruise Control, press and hold the switch for approximately 2
seconds or longer.
18
*
on/off.
" or "
*
.
*
.
*
is cancelled, this switch can be used to resume the cruise control
(CRUISE) switch is on, switching between Adaptive Cruise Control and
" appears on the EyeSight display area in the
*
/
*
is currently set).
is currently set).
(Following distance