Subaru EyeSight 2016 Manual page 30

Following distance
warning
Possible collision area
Operating Strength of
system Automatic Braking
Following
No brake control
distance
warning
First
Moderate
braking
Secondary
Strong
braking
• To release the brake control after the vehicle has come to a stop through
pre-collision braking system, perform the following.
- Depress the brake pedal.
- Depress the accelerator pedal (except when the select lever is in the
position).
- Shift the select lever into the
• After stopping with secondary braking, in the following cases, brake control
will be released and the electronic parking brake will operate.
(For details about how to release the electronic parking brake, refer to the
Owner's Manual for your vehicle.)
- When approximately 2 minutes have elapsed since stopping and not
depressing the brake pedal
- When any door (except the rear gate/trunk) is opened
* Refer to the Owner's Manual for details.
- When EyeSight is temporarily stopped
First braking
& warning
Highly possible
collision area
Indication on the
combination meter display
NOTE
P
Secondary braking
& warning
Extremely highly possible
collision area
position.
Pre-Collision Braking System
Obstacle
Warning
buzzer type
Repeated
short beeps
Repeated
short beeps
Continuous
beep
N
Continued on next page ⇒
S02389
29