Subaru EyeSight 2016 Manual page 77

Table of Contents

Advertisement

Conventional Cruise Control
• Press the
changes from green to white while the set vehicle target speed remains displayed
on the EyeSight display area.
When the
Conventional Cruise Control will be turned off.
Automatic cancellation by the system
In the following cases, a buzzer sounds 1 short beep and 1 long beep and the Cruise control
function is automatically cancelled. (
tional Cruise Control cancellation message is displayed on the screen.
After the conditions listed below have been
eliminated, perform the cruise control set
operation again to reactivate cruise control.
• The select lever is moved to a position
D
other than
or
• Vehicle speed drops to approximately 25
km/h or less (due to a steep uphill grade or
some other reason).
• Vehicle speed rises to approximately 160
km/h or more.
• The ABS, Vehicle Dynamics Control or
Traction Control functions activate.
• Any door (except the rear gate/trunk) was
opened.
• The driver's seatbelt is unfastened.
• The Electronic Parking Brake is engaged (When the brake system warning light is illumi-
nated or flashing).
• When the EyeSight system has a malfunction. ("
Yellow) is turned on.)
• The steering wheel is turned significantly in either direction.
• The grade of the road is steep.
• The Pre-Collision secondary braking is activated.
76
(CRUISE) switch.
(CRUISE) switch is pressed again,
S02438
M
.
(White)
changes from green to white.) Also, the Conven-
(White)
" (EyeSight Warning indicator:
will be turned off and
S02453
S02524

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents