Subaru EyeSight 2016 Manual page 20

■
switch/
These are used in the following situations.
• When switching the screen displayed on the combination meter display.
• When changing the Warning Volume settings, etc.
⇒
Refer to page 83.
■
(Info)/SET switch
This is used in the following situations.
• When displaying the message that appeared in the warning screen area again.
⇒
Refer to page 85.
• When changing the Warning Volume settings, etc.
⇒
Refer to page 83.
■
(Pre-Collision Braking System OFF) switch
Press and hold this switch for approximately 2
seconds or longer to turn off the Pre-Collision
Braking System and Pre-Collision Throttle
Management.
When these functions are off, the Pre-
Collision Braking System OFF indicator light
on the instrument panel illuminates.
Press and hold the switch again to turn on the
Pre-Collision Braking
Collision Throttle Management. This turns off
the Pre-Collision Braking System OFF indica-
tor light.
⇒
Refer to page 31.
■
(Lane Departure Warning OFF) switch
Press and hold this switch for approximately 2
seconds or longer to turn off the Lane
Departure Warning and Lane Sway Warning
functions.
When these functions are off, the Lane
Departure Warning OFF indicator light on the
instrument panel illuminates.
Press and hold the switch again to turn on the
Lane Departure Warning and Lane Sway
Warning functions. This turns off the Lane
Departure Warning OFF indicator light.
⇒
Refer to page 64.
switch
System and Pre-
About EyeSight
S02387
S02388
19