Subaru EyeSight 2016 Manual page 31

Pre-Collision Braking System
⇒ Continued from previous page
• Neither first braking nor secondary braking will operate in the following
cases.
- When the vehicle is travelling at approximately 1 km/h or less (When the
select lever is in the
4 km/h or less) or 160 km/h or more
- When Vehicle Dynamics Control is active
• If the system detects the brake lights of the vehicle in front, your vehicle
will start decelerating earlier than if it does not.
• There are some cases where the first braking is applied for a longer period
of time. One of the reasons for this is due to a large speed difference with
an obstacle in front. In those cases, stronger or weaker braking control
may be activated.
Pre-Collision Braking Assist operation
When the Pre-Collision Braking System is activated (when the system determines that there
is a high risk of collision with an obstacle in front), if the driver depresses the brake pedal,
the system determines that this is emergency braking and activates braking assist automat-
ically.
If the driver depresses the brake pedal manually while following distance
warning is activated, the Pre-Collision Braking Assist will not work. (The
vehicle decelerates with the normal braking force operated by the driver.)
• Pre-Collision Braking Assist function does not operate when the vehicle
speed is approximately 10 km/h or less or 160 km/h or more.
• For information about the braking assist function, refer to the Owner's
Manual for your vehicle.
30
N
position and your vehicle speed is approximately
CAUTION
NOTE