Subaru EyeSight 2016 Manual page 16

■ EyeSight warning indicator (yellow)
• This indicator illuminates or flashes when a malfunction occurs in the EyeSight system.
• When it is illuminated or flashing, none of the EyeSight functions can be used (including
Adaptive Cruise Control and the Pre-Collision Braking System, etc.).
⇒
Refer to page 80.
■ EyeSight temporary stop indicator (white)
• This indicator illuminates when the EyeSight system is temporarily stopped.
• When the ignition switch is placed in the ON position, it will illuminate if the
(CRUISE) switch is set to ON within approximately 7 seconds of the engine starting. It
turns off when approximately 7 seconds have elapsed since the engine started.
• When it is illuminated, none of the EyeSight functions can be used except for Conven-
tional Cruise Control.
⇒
Refer to page 81.
■ Your vehicle indicator
When the brake pedal is depressed or the brake control function is activated, the brake
indicator light illuminates in red.
■ Lane Departure Warning OFF indicator light
• This indicator illuminates when the Lane Departure Warning and Lane Sway Warning are
off.
• It also illuminates when the ignition switch is turned to the ON position, and then approxi-
mately 7 seconds after the engine starts, the Lane Departure Warning will be turned off or
remain illuminated depending on the current status (ON or OFF).
⇒
Refer to page 64.
■ Pre-Collision Braking System OFF indicator light
• Illuminates when the Pre-Collision Braking System and Pre-Collision Throttle
Management are off.
• It also illuminates when the ignition switch is turned to the ON position, and then turns off
approximately 7 seconds after the engine starts.
⇒
Refer to page 32.
About EyeSight
15