Table of Contents
Advertisement
36
Use a 4 mm Allen to loosen the faceplate on the front of your
stem, and center the positioning target. Then retighten
the faceplate.
38
Use the provided Shimano lead-connector tool from the
small parts box to insert the display cable into the small port
under the display. You should feel a securing click when the
connection is made.
37
Use a 3 mm Allen wrench to loosen the paddle grips.
Reposition them so they are level with the ground. Then
retighten them.
39
Replace your battery by sliding it into the cradle and rotating
towards the bike frame until it clicks into place.
11
Advertisement
Table of Contents
