Table of Contents
Advertisement
To Remove Song Protect
1. Select the song from which you want to remove the
protect function (Song Select; p. 49).
2. Press [PLAY (DISPLAY)].
3. Hold down [SHIFT] and press [F1 (SONG)].
The Song menu icon appears in the display.[
4. Press [F4 (PROTC)].
If "PROTC" does not appear above [F4], press [PAGE]
until PROTC" is displayed, and then press [F4 (PROTC)].
"Song Protect On
Off, Excute ?" appears in the
display.
5. Press [F4 (Exec)].
A message will ask you to confirm.
6. Press [ENTER/YES].
7. Song protect will be disabled. "---Complete---" appears
in the display.
8. Press [PLAY (DISPLAY)] to return to the Playlist display.
Chapter 3 Playback Operations
Selecting and Loading Songs
(Song Select)
Before you can play a song you have saved on the hard drive,
you must select and load the song into the VS-1824's
memory. Use the following procedure to select and load the
desired song.
1. Press [PLAY (DISPLAY)].
2. Hold down [SHIFT] and press [F1 (SONG)].
3. Press [F1 (Sel)]—the Song Select screen appears, showing
the songs stored in the currently selected hard drive
partition.
You can view the songs as icons or in a list. You can also
see the size of each song, and the date and time at which
it was created.
4. Press [F1] to toggle between the icon display and the list
display to select the desired way of viewing the songs.
Icon display
5. Press [F5] to toggle between date of creation
creation
size.
Icon / Date of creation
Icon / Time of creation
List / Date of creation
List / Time of creation
6. Use TIME/VALUE to move the cursor to the song that
you wish to select and load.
7. Press [F4 (Exec)].
A message will ask you to confirm.
8. Press [ENTER/YES].
The display will ask "STORE Current?"
9. If you wish to save the current song, press
[ENTER/YES]. If not, press [EXIT/NO].
After the current song has been saved—and the selected
song has been loaded—you are returned to Play mode.
List display
time of
Icon / Size
List / Size
49
Advertisement
Table of Contents
