Table of Contents
Advertisement
7. Press [F1 (Back)].
8. Use [
], [
], [
cursor, and use the TIME/VALUE dial to set the
parameters.
Type
Select how the phrase will be divided. In this case, select
"Split."
Divide:
Automatically divide the phrase into two or
more phrases.
Split:
Manually divide the phrase into two separate
phrases.
To (to point)
Specify the time location at which the phrase will be split.
9. Press [F4 (Exec)].
10. When the display indicates "Complete," press
[PLAY (DISPLAY)]. You will return to Play mode.
ig.04-63
], and [
] to move the
Chapter 10 Track and Phrase Editing
Phrase Move
This operation moves the specified phrase to another
location on the timeline, or to a different track. This is
convenient for correcting timing mistakes that can occur
when recording.
* Each phrase needs to be longer than 0.5 seconds. Otherwise,
short phrases will not be played.
fig.04-47
A
TO
B
TO
1. Press [PLAY (DISPLAY)].
2. Hold down [SHIFT] and press [F2 (TRACK)].
3. Press [F1 (Tr/Ph)] so that the Phrase Edit Menu appears.
4. Press [PAGE] so that [F3] indicates "Move," and then
press [F6 (Move)].
5. Press [F1 (Selph)].
6. The track SELECT buttons are used to select the source
track(s). Press the Track SELECT button to specify the
phrase to be moved.
Alternatively, you can use [
[
] to move the cursor to the phrase that you wish to
move, and press [F3 (MARK)] or [ENTER/YES].
The SELECT button stops blinking, indicating it is the
track to be moved.
If [F2 (All)] is pressed, all tracks are selected to be moved.
A'
Time
B'
Time
], [
], [
], and
155
Advertisement
Table of Contents
