Table of Contents
Advertisement
Chapter 23 Frequently Asked Questions
How Do I Create a Tempo Map?
The VS-1824 allows you to create a tempo map that controls
tempo and meter changes throughout your song. This is very
useful when you are integrating the VS-1824 with a MIDI
sequencer. Use the following procedure to create a tempo
map:
1. Hold [SHIFT] and press [F5 (SYSTEM)]. The "System
Menu" page should be displayed. If it is not, press [F6
(EXIT)].
2. Press [F6 (SYNC)]. If "SYNC" does not appear above
[F6], press [PAGE] followed by [F6]. The "Sync/Tempo"
page will be displayed.
3. Press [F3 (Tmap)] to display the "Tempo Map" screen.
4. Use [
] to move the cursor to the current tempo
setting (e.g. q = 120) and use the TIME/VALUE dial to
select the desired starting tempo for your song.
Tempo Map #1 must always start at Measure One.
5. Use [
] to move the cursor to the beat setting (e.g. 4/
4) and use the TIME/VALUE dial to select the desired
time signature.
6. Press [F2 (NEW)].
7. Use [
], [
], [
tempo setting and the TIME/VALUE dial to select the
new tempo.
8. Use [
] to move the cursor to the measure setting
and use the TIME/VALUE dial to select the measure
where you want the new tempo to begin.
9. Use [
] to move the cursor to the beat setting (e.g. 4/
4) and use the TIME/VALUE dial to select the desired
time signature.
10. Repeat Steps 6-9 for any additional tempo and/or time
signature changes as desired.
Why Doesn't it Change the Audio?
The tempo map can alter the tempo and meter of MIDI
sequences. It cannot, however, do the same for audio
recorded on the VS-1824. For this reason, it is best to
create your tempo map before you begin recording any
acoustic instruments whenever possible and to record
while listening to the metronome. It is only possible to
alter the playback speed of recorded audio by using the
Vari Pitch and/or Time Compression/Expansion
functions.
272
], and [
] to highlight the
How Do I Use Automix?
The Automix function of the VS-1824 allows you to perfect
your final mix before you commit to a master DAT tape or
CD. Instead of manually "riding" the faders while you are
recording to your master tape, Automix allows you to record
mixer changes such as level, pan, effects type, etc. You can
even automate the mixer settings for the inputs. This is
helpful when you have synchronized a keyboard or drum
machine and you want to mix it in with the audio tracks
without actually recording it. There are three main types of
Automix available on the VS-1824: realtime, Snapshot, and
gradation.
Realtime
Realtime Automix allows you to record fader
movements as you make them. This is great for
perfecting your track mixes before you record them
down to two tracks. Use the following procedure to
create a realtime Automix:
1. Press [AUTOMIX] so it is lit.
2. Hold [AUTOMIX] and press the Input and/or Track
SELECT buttons— so that they are flashing—for any
inputs or tracks that you want to automate.
3. Reset your song to the beginning and adjust the faders as
desired for the start of the song.
4. Hold [SCENE] and press [REC] to enable realtime
Automix mode.
5. Press [PLAY] and adjust the faders as desired.
6. Press [STOP] when you are finished. Reset your song to
the beginning and press [PLAY] to hear the results.
Snapshot
Snapshot automation allows you to recall settings such
as fader levels, effect send levels, effect types, and
panning at a specific point in time. This is useful, for
instance, when you want to change effects during your
song. Use the following procedure to create a Snapshot:
1. Press [AUTOMIX] so it is lit.
2. Hold [AUTOMIX] and press the Input and/or Track
SELECT buttons— so that they are flashing—for any
inputs or tracks that you want to automate.
3. Reset your song to the beginning and adjust the settings
as desired for the beginning of your song.
4. Hold [SCENE] and press [TAP] to create a Snapshot of
your initial settings.
Advertisement
Table of Contents
