Table of Contents
Advertisement
CD-R Backup
1. Select the drive (internal IDE hard drive) containing the
source song to be backed up as the current drive.
2. Place a blank CD-R/CD-RW disc in the CD-R/CD-RW
drive.
For details refer to the column
"Inserting a CD" (see p. 234).
3. Press [CD-RW/MASTERING].
4. Press [F4 (CDRBk)].
If you are using a finalized CD-RW disc that contains
data, "Erase?" appears in the display. To erase the
existing data, press [ENTER/YES]. "Erase Disc" appears
and the contents of the CD-RW disc are erased. If you do
not wish to erase the data, press [EXIT/NO], and insert a
new disc.
5. Press [
], [
], [
cursor. Then use the TIME/VALUE dial to adjust each
settings.
fig.07-14
], and [
] to move the
Chapter 18 CD-R Backup
SOURSE SONG
Mark the songs you want to back up.
Use the TIME/VALUE dial to move the cursor to the
song you want to back up, and then press [F3 (MARK)].
You can choose more than just one song to backup. By
pressing [F2 (ALL)], all songs will be marked for backup.
Press [F1 (SelSg)] to display a directory of songs. From the
song directory, press [F1 (Back)].
+Verify
If this is turned "On," verification will be performed
after the dong data has been backed up, to check
whether or not the data was saved correctly.
* When backing up to a CD-R, we recommend that you also
execute +Verify to check whether the data was bask up
correctly.
* Since +Verify checks the entire CD-R disc, the operation will
take a certain amount of time.
* If as a result of the "+Verify" operation you receive a warning
that was not written correctly, please make a backup on
another disc.
CD Speed
The song will be written at quadruple speed
x4:
(706 kilobytes per second).
x2:
The song will be written at double speed (353
kilobytes per second).
The available speeds will depend on the Roland-
approved CD drive connected to the VS-1824.
235
Advertisement
Table of Contents
