Capture Audio Data From Audio Cd (Capture Function) - Roland VS-1824 Owner's Manual

Chapter 13 CD-RW and Mastering
8. Press [STOP] when you are finished with the CD Player
function.
9. Press [PLAY (DISPLAY)] to return to the Playlist display.
If "Please Insert Disc!" Appears in the
Display
This indicates the CD-R/CD-RW drive loading tray is
open, that there is no disc loaded, or the CD-R/CD-RW
drive is not ready for use. Insert a CD-R disc, wait a few
moments for the CD-R/CD-RW drive to read the disc,
and then press [ENTER/YES].
If "Blank Disc" Appears in the Display
You are attempting to use the CD Player function with a
CD-R disc that has no audio recorded on it. Insert a
commercially recorded CD or a CD-R disc on which a
recording has been made, and try the operation once
more.
192
Capture Audio data from
Audio CD (Capture function)
VS-1824 have function to capture Audio data from Audio CDs.
This can capture audio from CD only in case the
sampling rate setting of current song is 44.1kHz.
If you are using a VS-1824 that is not
equipped with an internal CD-RW drive, you will need to
purchase a separately available CD-RW drive.
For instructions on connecting the drive, refer to "Connecting
an External CD-R/CD-RW Drive" (see p. 194).
PX-4220Te, PX-8220Te, PX-W124TSe, and PX-W1210TSE
manufactured by PLEXTOR is supported. In case you
are using other drives approved by Roland, consult with
your retailer, the nearest Roland Service Center, or an
authorized Roland distributor.
1. Load an Audio CD or CD-R/RW disc that contains audio
you like to capture on CD-R/CD-RW drive.
For details refer to the column
"Inserting a CD" (see p. 234).
2. Press [CD-RW/MASTERING].
CD-RW/Mastering Menu will appear.