Table of Contents
Advertisement
Chapter 7 Using Internal Effects (VS8F-2)
Creating and Saving User
Effect Patches
A VS-1824 with one or two of the optional VS8F-2 effect
boards installed will have 200 user patches, which are the
same as the first 200 preset patches. It is possible to overwrite
the user patches to store your own custom effects. To create
your own user patch, first select the preset patch whose
sound is closest to what you wish to create. Then alter the
settings of that patch. If you do not save the changes as a user
preset effect, your edits are lost once you select another patch
or recall a different Scene.
Create a User Effect Patch
1. Using the first six steps described in "Selecting Effect
Patches" (p. 101), select the patch containing the effect
algorithms you will base your new effect on. The
following screen is displayed:
fig.05-12
Patch Number
Patch Name
Algorithm Name
Cursor
2. Press [
] and [
When you select a multi-effect patch (e.g., Guitar Multi
2), use the TIME/VALUE dial to turn each effect within
that patch on or off. In the display, effect blocks that are
currently activated and on are highlighted. Move the
cursor to the highlighted effect block whose settings you
wish to change.
3. Press [F3 (Edit)] or press [ENTER/YES]. A list of settings
available in the effect block is displayed.
4. Press [
], [
], [
cursor in the screen. Use the TIME/VALUE dial to adjust
settings. For more detailed information about the
settings included in each effect algorithm, refer to the
"Algorithm List" (Appendices p. 25).
102
This Block is On
This Block is Off
] to move the cursor in the screen.
], and [
] to move the
The function buttons work as shown below:
fig.05-13
[F1 (
Blk)]:
Displays the settings of the previous effect block.
[F2 (Blk
)]:
Displays the settings of the next effect block.
[F4 (SAVE)]:
Displays the Effect Save screen.
[F6 (EXIT)]:
Exits the screen.
5. When saving an effect settings, it is necessary to either
save it as a user patch, or save the mixer settings as a
Scene. If you want to use a custom effect in a different
song, save it as a user patch. If you are only going to use
it in the currently selected song, you can save it as part of
a mixer Scene. At this point, save the effect using one of
the two methods described below.
Save an Effect as a User Patch
1. Press [F4 (SAVE)]. The Effect Name screen appears in the
display.
2. Turn the TIME/VALUE dial to select the destination
patch number (U000-U199).
fig.05-14
Patch Number
Patch Name
3. Use [
] and [
], and the TIME/VALUE dial to
create the name of the user patch. The function buttons
work as shown:
[F1 (Hist)]:
Press this button to take you through a list of the last 20
user patch names entered, one at a time.
Advertisement
Table of Contents
