Table of Contents
Advertisement
Using EZ Routing Templates
Saving an EZ Routing Template
1. When you have pressed the SAVE button after creating a
new setup, the Routing Save screen appears in the
display. Turn the TIME/VALUE dial to select the
number of the desired memory location for your EZ
Routing template.
fig.02-17
Routing Number
Routing Name
2. Press [
] to move the cursor. Use [
[
], and [
] to move the cursor and the TIME/
VALUE dial to enter the user EZ Routing's name.
The function buttons work as shown below:
[F1 (Hist)]:
Pressing this button will take you through a list of the
last 20 names entered, one at a time.
[F2 (Clr)]:
Clears all the characters in the window.
[F3 (Del)]:
Deletes the character where the cursor is positioned.
[F4 (Ins)]:
Inserts a space where the cursor is positioned.
[F5 (Write)]:
Stores the routing and exits the Routing Save screen.
[F6 (EXIT)]:
Exits the Routing Save screen without storing the
routing.
If you press [NUMERICS/ASCII] so it is lit, you can use the
SELECT buttons to enter characters in a manner similar to
using a computer keyboard.
3. After entering the name, press [F5 (WRITE)]. The routing
is saved.
4. Press [PLAY (DISPLAY)] to return to the Playlist display.
Recalling an EZ Routing Template
1. Press [EZ ROUTING].
The EZ Routing icon appears in the display.
2. Use [
TIME/VALUE dial to move the cursor to the routing you
want to use.
3. Press [F5 (Exec)]. If "Exec" does not appear above [F5],
press [PAGE] until you see "Exec" above [F5], then press
[F5 (Exec)].
fig.02-18
], [
],
4. Press [
Template" and press [F5 (Exec)] once more. "Apply this
ROUTING ?" appears in the display.
5. Press [YES] to recall the EZ Routing settings. (Or, if you
wish to cancel the operation, press [NO].)
6. Press [PLAY (DISPLAY)] to return to the Playlist display.
Deleting an EZ Routing Template
1. Press [EZ ROUTING]. The EZ Routing icon appears in
the display.
2. Use [
VALUE dial to move the cursor to the routing you want
to delete.
3. Press [F6 (Del)]. If "Del" does not appear above [F6],
press [PAGE] until you see "Del" above [F6], then press
[F6 (Del)]. "EZ ROUTING Delete OK ?" appears in the
display.
4. Press [YES]. (Or, if you wish to cancel the operation,
press [NO].) The EZ Routing is deleted. The four factory
templates—"Recording," "Mix Down," "Bouncing" and
"Mastering"—cannot be deleted.
5. Press [PLAY (DISPLAY)] to return to the Playlist display.
Chapter 8 EZ Routing
], [
], [
], and [
] or use the
] and [
] to move the cursor to "Use
], [
], [
], and [
] or use the TIME/
123
Advertisement
Table of Contents
