Table of Contents
Advertisement
Track Exchange
This operation swaps the audio data on two tracks.
fig.04-14
Example: Exchanging tracks 1 and 2
Track1
A
B
Track2
D
Track1
D
Track2
A
B
1. Select the V-Track containing the source playback audio
to be exchanged.
2. Hold [SHIFT] and press [F2 (TRACK)].
3. Make sure "Track Edit Menu" appears in the display.
If it does not, press [F1 (Tr/Ph)] once.
4. Press [F4 (Xchg)] for Track Exchange.
If you don't see "Xchg" above [F4], press [PAGE] until
"Xchg" appears, and then press [F4 (Xchg)].
5. The track SELECT buttons are used to select the source
track(s) and the STATUS buttons are used to select the
destination track(s). Press the Track SELECT button to
specify the track to be exchanged. The SELECT button
stops blinking, indicating it is the track to be exchanged.
Press the Track STATUS button for the desired
destination track. The STATUS button turns red.
* If you want to select TR 1-12, press [FADER/MUTE] several
times until the "TR" indicator lights.
If you want to select TR 13-18, press [FADER/MUTE] several
times until the "TR" indicator blinks.
"Switching the Fader Functions" (p. 71)
For example, if you wanted to exchange the audio from
Track 3 to Track 7, you would first press the Track 3
SELECT button, then press Track 7 STATUS.
Alternate method:
a.
Press [
], [
cursor to the track you want to exchange.
b.
Press [F3 (MARK)].
c.
If [F2 (All)] is pressed, all tracks are selected to be
exchanged.
C
E
E
C
Time
], [
], and [
] to move the
Chapter 10 Track and Phrase Editing
fig.04-15
d. Use the TIME/VALUE dial to specify the V-Track
for the destination. For example, "1-1" indicates
"Track 1, V-Track 1," and "9L-1" indicates "Track 9,
V-Track 1."
* Do not designate V-Tracks that have already been specified as
exchange destinations for other tracks.
6. Repeat Step 5 if you want to exchange more than one
pair of tracks.
7. Press [F4 (Exec)]. This executes Track Exchange.
You cannot mix on one V track regularly recorded audio
with audio that has been recorded with the CDR Recording
Mode ON.
In Songs that use a Recording Mode other than "CDR"
follow these rules:
• "On" cannot be exchanged to other V-tracks which are
not on the mastering tracks.
• Even on the mastering tracks, "CDR" V-tracks can only
be exchanged with V-tracks which already have been
recorded with "CDR" data, or with new V-tracks which
have no data recorded on them.
If the above rules are not followed, then "Found Illegal
Track Pair!" appears in the display and track move
cannot be executed. Please press [ENTER/YES] and
select the copy destination again.
8. When the exchange is completed correctly, "Complete"
appears in the display.
9. Press [PLAY (DISPLAY)] to return to the Playlist display.
If you are unhappy with the edit you made, press [UNDO].
"UNDO Level 1" will be displayed. Press [ENTER/YES] to
restore your track(s) to their condition prior to the edit.
147
Advertisement
Table of Contents
