Table of Contents
Advertisement
Chapter 13 CD-RW and Mastering
Playing Back the Mastering
Tracks
Here's how you can verify the audio that was mixed down to
the mastering tracks. You will listen to the mastering tracks.
Tracks 1-16 themselves will not be played.
1. Press [PLAY (DISPLAY)].
2. Press [PAGE] so that [F6] indicates "M ***" (*** is either
Rec, Ply, or Off).
fig.2-11
3. Press [F6] until "M Ply" appears above [F6].
Press [F6] once more to select this setting. The current
status of the mastering tracks is shown in the display.
fig.2-12.e
Off
Record wait Status
For details on the signal flow, see p. 27.
4. Move to the location at which you started the mixdown.
180
5. Press [PLAY]. The mastering tracks will play back. Use
At this time, the function buttons will perform the following
actions.
6. When playback ends, press [STOP].
Playback Status
the master fader to adjust the volume to a comfortable
listening level.
[F1 (ZOOM+)]:
Enlarges the playlist display in the track direction (three
levels).
[F2 (ZOOM-)]:
Reduces the playlist display in the track direction (three
levels).
[F3 (
)]:
Enlarges the playlist display in the time direction (five
levels).
[F4 (
)]:
Reduces the playlist display in the time direction (five
levels).
[F5 (WAVE)]:
Displays the sound level (waveform) that is recorded in
the tracks.
Signal flow (routing)
Track 1–16
MIX
L
R
MIX
TR1
Sw
Mastering
Track
TR15-16
MASTER OUT
MONITOR OUT
TR16-16
MASTER
Advertisement
Table of Contents
