Restarting; If "Store Current ?" Is Displayed; Saving Your Song (Song Store) - Roland VS-1824 Owner's Manual

24-bit digital studio workstation
Hide thumbs Also See for VS-1824:
Table of Contents

Advertisement

Restarting

You can restart the VS-1824 without turning off the rear
panel POWER switch. This is convenient for switching disks
when working off of a removable drive (such as a Zip drive)
connected to the VS-1824's SCSI port.
1. Perform the Shutdown procedure as described in
"Turning Off the Power," p. 32.
2. Make sure "PowerOFF/RESTART" appears in the
display.
3. Hold [SHIFT] and press [PLAY (RESTART)].
This restarts the VS-1824.

If "STORE Current ?" is Displayed

When you begin various operations, such as selecting a
different song or shutting down, the message "STORE
Current ?" may be displayed. This message asks whether
you wish to save the currently selected song, or any edits or
changes recently made to the current song, to the drive.
If you wish to save the song, press [ENTER/YES].
If you want to proceed with the shutdown without saving
the song, press [EXIT/NO].
If you press [ENTER/YES] in response to the "STORE
Current?" message when Song Protect is on, the message
"Song Protected" is displayed, and you will be unable to
save any changes or edits you made to the song. Before
editing a song, turn Song Protect off (p. 48). Otherwise, press
[EXIT/NO].
Chapter 2 Basic Operation
Saving Your Song
(Song Store)
Use the Shutdown procedure before turning the power off. If
you just turn the power off without using Shutdown, song
data could be lost and you could possibly damage your hard
drive. When you switch songs or change drives, a message
will ask to confirm whether the currently selected song
should be saved. Also, the contents of a recorded song can be
lost due to unforeseen accidents such as a power failure or
power outage. Once lost, the contents of a recorded song
cannot be restored to its previous condition. To prevent this
from happening, use the following procedure to save your
songs on the drive.
Current Song (See Appendices p. 12)
* When handling important song data, or when using the
VS-1824 for extended periods, we strongly recommend you
use the Song Store procedure frequently.
1. Hold [SHIFT] and press [ZERO/(STORE)].
"STORE OK?" appears in the display.
2. Press [ENTER/YES].
If the song is saved properly, the Playlist display
reappears.
If you wish to cancel the STORE command, press
[EXIT/NO].
33

Advertisement

Table of Contents
loading

Table of Contents