Functions And Operation; Control Units Q3 On / Off; Operating Concept And Oled Display - Schick Q3 Series Instructions Manual

9

Functions and operation

9.1 Control units Q3 on / off

Switching on / off takes place via the main switch on the front of the control unit. Readi-
ness indication via display or LED on the main switch.
The Q3 control device (knee, foot or table version) may only be switched off using the
main switch when the handpiece is stopped.

9.2 Operating concept and OLED display

The OLED display of the Q3 control device (knee and table version only) provides infor-
mation about all operating states of the device after switching on.
In particular, the following parameters are displayed:
Ready for operation
-
mum possible speed for the handpiece, the direction of rotation and the cruise control
(if activated).
Operating state:
-
letters on black ground to black letters on white ground.
OLED display basic display (knee version):
Direction of rotation
Cruise control
with knee de-
vice
OLED display when the handpiece is running (table version):
Direction of rotation
Foot switch for ta-
ble-top units
Issue Q3
: The display shows the preselected maximum speed, the maxi-
While the handpiece is running, the basic display switches from white
Functions and operation 9
Maximum possible speed
Preset maximum speed
Preset maximum speed
Current speed on the handpiece