Technical Description; Overview; Function Description; Interfaces - Schick Q3 Series Instructions Manual

Hide thumbs Also See for Q3 Series:

Table of Contents

Technical Description

The Q3 system is a modern workstation system designed for universal use in the dental

laboratory for processing crowns, bridges as well as plastic and model casting work. Q3 is

available in three different control variants: knee control (SK), foot control (SF) and table

control (ST).

The handpiece is used as a hand-held grinding or cutting tool. The maximum speed of the

handpiece is limited using the rotary knob on the control unit for the table and knee ver-

sions, and for the foot version using the max. Button on the front of the control unit.

Optionally, the QUBE or QUBE II control satellite can be connected. The preset and current

speeds are shown, as well as the limitation via the display and the touch-sensitive buttons.

Depending on the version, the speed is regulated variably via the knee plate, foot lever or

connected dynamic foot pedal (table version only).

The Q3 control units have the following interfaces to other machines:

Connection for controlling extraction systems. If the Q3 is operated on a KaVo SMARTair

stand-alone suction device or a Zubler suction point opener AP 501, the optional control

lines, item no .: 9229 (for KaVo) or item no. 9234 (for Freuding / Zubler) can be used to

connect and secure the switching signal.

Activation of the suction point signal:

 With the control switched on with the handpiece connected, press and hold the

button on the foot and knee unit for 4 seconds, and press and hold the button

on the table unit for 4 seconds.

 Confirmation via 2 x vibrations on the handpiece

Deactivation of the suction point signal in the same way.

Issue Q3

Technical Description 4

Table of Contents

Q3 basicQ3 profiQ3 premium10785 10775 10765