Technical Terms And Abbreviations Used; General Safety Regulations; Principles; Intended Use - Schick Q3 Series Instructions Manual

2 General safety regulations

1.5 Technical terms and abbreviations used

Abbreviation
MH
SK
SF
ST
Tab. 1.2 used abbreviations
2 General safety regulations

2.1 Principles

Use only with the maximum speeds specified by the manufacturer. Use only tools that are
intended by the manufacturer / dealer for the application and performance data of Q3.
Applications: Industry, commerce
Qualifications of personnel: Trainees and interns must be instructed by an experienced op-
erator
It is operated manually: optionally using the knee plate, foot lever or foot pedal.

2.2 Intended use

The Q3 systems are designed exclusively for universal use in the dental laboratory for dry
processing of solid workpieces such as crowns, bridges as well as plastic and model cast-
ing work. Only tools which are intended for the processing of such materials may be used.

2.3 Foreseeable misuse

The system may not be used under the following circumstances:
- In an explosive environment
- For medical applications on the patient
- processing of wet materials
Explanation
Motor handpiece
Knee control
Foot control
Table control
D21775 issue Q3