Erasing - Ricoh RDC-5000 Operation Manual

Magnifying an Image (Zoom Playback)
Entering the mode
Press the PROGRAM button on the remote control unit.
Moving the playback position
Press the FWD ( △ ) or REV ( ▽ ) button.
Canceling the mode setting
Press the ENTER button to return to the normal playback display.
Displaying Multiple Images (Multi Image Playback)
Entering the mode
Press the MULTI button on the remote control unit.
Moving the selected file
Press the FWD ( △ ) or REV ( ▽ ) button.
Canceling the mode setting
Press the ENTER button and the selected file will appear on the normal
playback display screen.

Erasing

You can use the remote control unit to erase a recorded file at a time.
Important
• Remember that files cannot be restored once they are erased. Before
Note
starting to erase files, make sure that you want to erase them.
q Set the camera's mode dial to [ ]. And
press the CARD/IN button to select a
source file to erase.
w The erase menu will open. Use the FWD
( △ ) or REV ( ▽ ) button to select an
erase mode.
Select [ERASE SINGLE IMAGE] from the erase
menu to erase selected images one at a time.
114
RELEASE
ERASE
FWD PROGRAM
EV
ENTER
REV
MULTI