Interval (Time Lapse) Shooting Mode - Ricoh RDC-5000 Operation Manual

Interval (Time lapse) Shooting Mode

The camera can be set to take pictures automatically at preset times. The times can
be set in steps of 30 seconds from 30 seconds to 3 hours. For example, if you set a
time of 1 hour, the camera will release the shutter every hour, taking pictures
continuously until the SmartMedia memory card runs out of available memory.
Important
• Check the remaining number of pictures that can be stored on the
Note
SmartMedia memory card and the internal memory card before starting
interval (time lapse) shooting. The auto power off will be activated after 24
hours.
q Set the mode dial to [
MENU button.
The record menu will be displayed.
• To cancel the operation, press the
Note
MENU button.
w Press the ▼ or ▲ button to select
[INTERVAL MODE] and press the ENTER
button.
The interval timer (time lapse) settings menu will
be displayed.
• To cancel the operation, press the
Note
MENU button. The screen returns to
record menu.
e Press the ENTER button until the digit
you want to set starts to flash.
• Each time you press the ENTER
Note
button, the flashing digit will change,
from the hour to the minute to the
second.
74
] and press the
[ R E C O R D ]
M E N U
R E C O R D I N G M O D E :
W H I T E B A L A N C E : A U T O
+ / –
: O F F
F O C U S : A U T O
D A T E I M P R I N T : O F F
R E D E Y E R E D U C T I O N : O F F
M O N O C H R O M E : O F F
I N T E R V A L M O D E : O F F
B A C K : M E N U S E L . : E N T E R
[ I N T E R V A L ]
M E N U
0 : 0 0 : 0 0
B A C K : M E N U S E L . : E N T E R