Changing Osd (On-Screen Display) Language - Ricoh RDC-5000 Operation Manual

Changing OSD (On-Screen Display) Language

Displays information appearing on the LCD monitor in one of two alternative
languages, Japanese and English.
q Set the mode dial to [
The setup menu is displayed.
• To cancel the operation, set the mode
Note
dial to another mode.
w Press the ▼ or ▲ button to select
[LANGUAGE] and press the ENTER
button.
A language setup menu is displayed.
• To cancel the operation and return to
Note
the setup menu, press the MENU
button.
e Press the ▼ or ▲ button to select a
language and press the ENTER button.
The display language setting is updated and the
setup menu is displayed again.
When the setting is complete, set the mode dial
to select another mode.
Switching Back to English Display
When you have switched the LCD to Japanese
display, choose [ 言語設定 ] from the SETUP
menu and then choose [ENGLISH] from the
resultant language setup menu to switch back
English display.
How To Cancel the Setting
Follow the above procedures and select the other language in step e above.
The display on the LCD monitor will then change accordingly.
• Enable the save mode to save the language setting. See "Keep Settings"
Note
(p.106).
104
].
[ S E T U P ]
M E N U
F O R M A T
D A T E S E T T I N G : 1 9 9 9 / 1 / 1
K E E P S E T T I N G S
B E E P S O U N D : O N
A U T O P O W E R O F F : O N
L A N G U A G E : E N G L I S H
V I D E O O U T M O D E : N T S C
V E R S I O N
S E L . : E N T E R
L A N G U A G E
J A P A N E S E
E N G L I S H
C A N C E L : M E N U S E L . : E N T E R