Lcd Panel - Ricoh RDC-5000 Operation Manual

Error Messages
If any of the error messages listed below appears on the camera's LCD monitor, read
the corresponding explanation and take the corrective action suggested.
Error
Message
FORMAT CARD
FORMAT
INTERNAL
MEMORY
CARD ERROR
If the error display does not clear, reset the LCD monitor to its factory default:
Note
How to reset: With the terminal cover open, press the reset button. If the error
display still won't clear, call your dealer or our service contact.

LCD Panel

Initial display (SETUP mode)
The LCD panel appears
blank.
14
F O R M A T
I N T E R N A L
M E M O R Y
Explanation and Remedy
The SmartMedia memory card is
unformatted. Format the card with the
camera before using it.
Format the internal memory before using it.
A SmartMedia memory card of this type is
not supported by this camera.
Error message
Reference
Page
P. (33)
P. (107)
–