Erase All Images - Ricoh RDC-5000 Operation Manual

Erase All Images

All recorded files are erased.
Important
• Remember that files cannot be restored once they are erased. Before
Note
starting to erase files, make sure that you want to erase them.
q Set the mode dial to [ ] and press the
CARD/IN button to select a source file to
be erased.
An erase menu is displayed.
w Press the ▼ or ▲ button to select
[ERASE ALL IMAGES] and press the
ENTER button.
The erase all images menu is displayed.
Note
• To cancel the operation, set the mode
dial to another mode.
e Press the shutter release button.
The "ERASING" message is displayed, and all
the files are erased.
Note
• To cancel the operation, press the
MENU button. The erase menu is
displayed.
The erase menu is displayed again after erasing
all the images. Then, turn the mode dial to
select another mode.
Note
• High-capacity SmartMedia cards or larger number of files may take long
time to erase.
• Protected files, which are identified by the
remain on the SmartMedia memory card. See "Protecting a File" (p.87).
96
mark, are not erased but