Before You Start Recording; Setting The Date And Time - Ricoh RDC-5000 Operation Manual

Before You Start Recording

This section explains the initial camera adjustments and pointers you should know
before starting to record pictures.

Setting the Date and Time

The date and time are recorded when you shoot a picture. You will need to adjust
these settings when you first use the camera and each time you change time zones on
trips.
• Use the yy/mm/dd format to set the date.
Note
• Time is displayed in the 24-hour clock format. Midnight is expressed as
00:00 and noon as 12:00.
q Slide the center button of power switch
to turn on the camera.
"Turning On the Camera" (p.41)
See
w Set the mode dial to [
The setup menu is displayed.
• To cancel the operation, turn the mode
Note
dial to another mode.
e Press the ▼ or ▲ button to select [DATE
SETTING].
].
[ S E T U P ]
M E N U
F O R M A T
D A T E S E T T I N G : 1 9 9 9 / 1 / 1
K E E P S E T T I N G S
B E E P S O U N D : O N
A U T O P O W E R O F F : O N
L A N G U A G E : E N G L I S H
V I D E O O U T M O D E : N T S C
V E R S I O N
I M P R I N T I N G M O D E : D I S P L A Y
S E L . : E N T E R
1
35