Playing Back A File; Operation Flow - Ricoh RDC-5000 Operation Manual

Playing Back a File

This section provides instructions for playing back recorded image files.

Operation Flow

To play back an image file, follow the steps below:
Turn on the Camera
Slide the power switch on and set the mode dial to [
Select a source file to playback
Select the internal memory or SmartMedia of the source for playback.
See"Insert a SmartMedia Memory Card" (p.32).
Select a File
Press the zoom button to select a file.
See "Playing an Image File" (p.83).
Switch Display Modes
Switch the display mode between zoom and multi-image playback, and
so on.
See:
"Multi Image Playback" (p.84).
"Zoom Playback" (p.85)
"Auto Playback" (p.86)
Files That Can Be Played on the Camera
The following kinds of files can be played on this camera:
• Files recorded on this camera
• Files transferred from a PC using software compatible with this camera
• Files shot with another brand of camera
See "Playing a File Shot with Another Brand of Camera" (p.88)
• The "UNMATCHED FILE" message will be displayed if an unplayable file
Note
is encountered.
• Data recorded on the Ricoh RDC-300Z/RDC-4300, 4200 digital camera
can also be displayed (but Multi Image Playback, zoom playback, sound
file or NC file playback is not possible).
82
] (p.41).